HART BALSA ADHESIVE TUBE WITH NOZZLE 35G UHU

About this product

PRODUCT DESCRIPTION Crystal clear, quick setting special adhesive for assembling small parts in model building, handicraft and for general use at home. Particularly suitable for balsa wood and wooden materials. It sets as a hard film, therefore it is also suitable to strengthen and reinforce weak areas and to stiffen surfaces of many types of material. FIELD OF APPLICATION Suitable for balsa wood, wood based materials, metal and many types of plastic. For model building. Not suitable for Styrofoam®, PE, PP, PA, POM, PTFE, silicone. PROPERTIES • Crystal clear· For assembling small parts in model building, handicraft and for general use at home · Particularly suitable for balsa wood and wooden materials · Sets as a hard film suitable to reinforce weak areas PREPARATION Personal safety: The adhesive contains volatile, highly flammable solvents. Therefore, corresponding safety measures should be take reagrding processing and storage. When gluing ensure adequate ventilation. Surface Requirements: The surface must be dry, clean and free of dust and grease. APPLICATION Directions for use: Apply a thin layer to one side. Immediately place the parts together and hold in place. For hard, enclosed surfaces apply a thin layer to both sides, let the adhesive dry, then re-apply to one side, place the parts together and hold in place. Stains/residue: Remove fresh glue stains as soon as possible. Cured adhesive residue can only be removed mechanically. TECHNICAL SPECIFICATIONS Chemical base: Cellulose nitrate Chemicals resistance: Water, oil, grease, diluted acids and alkalis Colour: Transparent Consistency: Medium viscosity Density approx.: 0,94 g/cm³ Final bond strength: 7-8 N/mm² (Beechwood) Final bond strength after: 24 hours Minimum application temperature: 10 °C Minimum temperature resistance: -30 °C Maximum temperature resistance: 90 °C Moisture resistance: Good Solid matter approx.: 30 % Solvent: Mixture of low-boiling esters and alcohols Transparent: Yes Viscosity: Liquid Viscosity approx.: 9000 mPa·s Water resistance: Very good PHYSIOLOGICAL PROPERTIES The dried adhesive is inert, completely neutral and physiologically safe. STORAGE CONDITIONS Store in cool dry place.